KIT ACE 601 N/E Featured
- font size decrease font size increase font size
- Rate this item
- Published in Sliding gates
KIT ACE 601 N/E -GEARMOTOR FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotors with integrated control unit.
Three models with different application limits guaranteed by new mechanical solutions and 24V
motor with encoder control. The control units are intuitive in programming and easy to connect thanks
to the new internal layout. Possibility of connecting two gearmotors in Master and Slave configuration for automations with opposing door leafs.
KIT ACE 601 N/E -GEARMOTOR FOR SLIDING GATES UP TO 600Kg
Electromechanical gearmotors with integrated control unit.
Three models with different application limits guaranteed by new mechanical solutions and 24V
motor with encoder control. The control units are intuitive in programming and easy to connect thanks
to the new internal layout. Possibility of connecting two gearmotors in Master and Slave configuration for automations with opposing door leafs.
Safe thanks to the sensitivity of internal sensors that detect the obstacle, slowing down ramps and the
option of direct control of 8K2 safety edges.
Versatile with the new Prg-LINK which enables control and programming of main control unit parameters.
Height and positioning of gearmotor with millimetric settings and release with encoded key.
Reliable with sturdy base in corrosion treated aluminium and magnetic limit switch with integrated
sensor.
ACE 601
Gearmotor for sliding gates up to 600 Kg.
KIT CONTAINING:
ACE 601
24 V electromeccanical gearmotor in grease bath with electronic limit switch, encoder and built in central unit.
For gates up to 600 kg.
NOIRE OC2 / EDGE OC2
2 channels plug in receiver.
NOIRE 2E / EDGE 2
2 channels rolling code transmitter
APRO
Key selector
VEDO 180
Pair of adjustable photocells
LACO 24AL
Flashing light with built in antenna
SUPLACO
Flashing light support
Fixing accessories and warning sign included.
TECHNICAL SPECIFICATIONS ACE601
Motor power supply 24 Vdc
Max. motor current 8 A
Motor power 250 W
Max thrust 600 N
Max gate weight 600 Kg
Actuator speed (m/min) 16
Work cycles intensive
Type of central unit A124A6
Encoder YES
Magnetic limit switch YES
Grease lubricant TS10
TECHNICAL SPECIFICATIONS BUILT IN Control unit A124A6
Voltage supply 230 V
Power supply 2 A
Max. current YES
Speed regulation YES
Master and Slave configuration YES
Double input 8K2 for safety edges YES
Compatible with Prg-LINK YES
Compatible with Sun Power YES
GENERAL DATA
Working temperature -20 +55°C
Protection level IP44
Weight 13 Kg
Pallet 30 pcs
ACCESSORIES
CREM P
Plastic rack with steel core. M4 28x22 mm, complete with washers and self boring screws 6,3x25.
Pack of 10 pcs 1 m each.
CREM12
Metal rack. M4 30x12 mm, complete with weldable spacers DSC, screws M8x25 TE and washers O 8.
Pack of 4 pcs 1 m each.
CREM8
Metal rack. M4 30x8 mm, complete with weldable spacers DSC, screws M8x25 TE and washers O 8.
Pack of 4 pcs 1 m each.
SERIE OC2
2 channels plug in receiver.
CB24
24 V battery charger. Suitable for 24 V control units.
SPB24
External box with 2 batteries 12V 7Ah.
For Ace601/801
SUN POWER
Solar power kit with solar panel and battery.
Suitable for all 24 V control units.
CPEVO
Base plate.
RVS
Mechanical brake for gates on sloping ground.
DSC
Weldable spacers for CREM12 and CREM8.
Pack of 30 pcs.
DAC
Screwable spacers for CREM12 and CREM8.
Pack of 30 pcs
DAP
Screwable and adjustable spacers for CREM12
and CREM8. Pack of 3 pcs.